Pooligloo is made with the following materials:

Material:
Highly-resistant polyester of 150 gr/m2, protected with polyester resin and waterproofed with polyurethane resin. Being the apparently weakest part of the enclosure, it easily resists sun, rain, strong wind and snow. It is a synthetic fibre made by Bayer.

This material is reinforced with polyester webbing and reinforcements of three-layers of material at certain securing points. Each part is carefully prepared. It can be washed in an industrial washing machine.

Anchors:
This system allows the arches to be secured and the webbing of the enclosure material to be tensed. It is made with screws, struts, stainless steel 304 sheets and mechanised polyethylene.

There are three types of bases/anchorages:

• Simple bases
• Double bases
• Frontal anchorages

Arches:
The arches form the structure that supports the enclosure. They are made of fibreglass reinforced with Polyester resin and emulsified with Polyurethane resin to prevent deterioration which can be caused by UVA rays. Four pieces are connected to each other with stainless steel male/female connectors to form an arch, which is passed through the material to take the form of the arch and create a useful interior space.

This is a simple video on our website which demonstrates how to assemble it.

The weight of a Pooligloo enclosure (average size 7 x 10) is around 70 kg and it is made up of three packs:

1. A kit bag containing the material which serves as the covering, of approximately 0.50 cm in diameter and 1 metre in height, with a weight of 30 kg.
2. A tube containing the rods which form the arches and whose length does not exceed 2.40 meters and weighs 30 kg.
3. A small box containing the anchors and a simple installation manual. Its weight does not exceed 10 Kg.

Pooligloo, has a number of advantages.

The result is a light and very flexible enclosure which supports, with movement, gusts of wind, rain, snow and hail and protects those who wish to use the pool out of season.

It is an enclosure which can be erected and dismantled easily and folded to one side temporarily and returned to its position when required. It can be stored anywhere and transported in any vehicle.

Pooligloo has two front doors each measuring almost two metres wide and two metres ten centimetres high. They can be opened and closed with double slide injected nylon zips.

All the Pooligloo components remain unaltered in saline climates and chlorine gases.

Its anchors are compatible with soil, grass, concrete or wood with a concrete base and any concrete-based blocks.
 

Is a smaller square version of Pooligloo, with just one door which is used to protect users of outdoor Jacuzzis or spas. The same materials used for its big sister Pooligloo
are used.

There are three sizes: 3.5 m x 3.5 m, 4.0 m x 4.0 m y 4.5 m x 4.5 m. Each size has a height which varies between 2.30 and 2.60 m.

Minigloo, offers its users the same advantages as Pooligloo:

It is easier to install as it is smaller, it is light and can be transported and stored anywhere.

It is presented in three packs: